Click on the pictures to enlarge them.

Lipoholder

Shop-Link

The Lipoholder can be mounted directly under the centerplate. For this remove the screws of the cap holder. It allows a quick change of the Lipo, a secure fit and protects the Lipo in addition to a crash.
Under the Lipoholder you can mount the Camera holder.

The kit has enough screws, nuts and bolts it to adjust the Lipoholder at different battery levels.

Assembly

The material (there is sufficient material included in the set):

First, upper plate:

Then the lower plate:

Now you can connect both plates with the spacers:

Example of a Lipo 14,8V/3300mAh/20C (flat):

Example of a Lipo 14,8V/5000mAh/20C (flat):

Example of a Lipo 14,8V/6600mAh/20C (flat):

This is how the Lipoholder assembled from (Example of a Lipo 6600mAh/Flat):

Mounting on the Centerplate

This holder at the bottom of the center plate must be removed bevore:

The Lipoholder is mounting through these holes of the cover holder. For this remove the nut and mount the Lipoholder with the screw.(attention: The opening shows to the side!) The existing bolts :

And so it looks completely assembled: