Mini8 Distribution PCB

http://gallery.mikrokopter.de/main.php/v/tech/IMG_2339.jpg.html

http://gallery.mikrokopter.de/main.php/v/tech/IMG_2340.jpg.html

Size: 34 * 27mm

Connection I2C-Bus

The I2C-Connection is done by 3-lines molex-cables. There are different length available in the MK-Shop

http://gallery.mikrokopter.de/main.php/v/tech/IMG_2342.jpg.html

Power connection

  • Plus (+) and Minus (-) are marked on the PCB
  • The FlightControl is connected via the 5-lines Molex and doesn't need further power connection.

http://gallery.mikrokopter.de/main.php/v/tech/IMG_2351.jpg.html

/!\ Twist the power lines to the BLCs to avoid magetic disturbtions

Connection buzzer

The buzzer can be connected to the board also:

http://gallery.mikrokopter.de/main.php/v/tech/IMG_2348.jpg.html

/!\ it could be nessecary to place the buzzer with a bigger distance to the compass on the NC.

complete connection

Here you can see the complete connection of an oktokopter: http://gallery.mikrokopter.de/main.php/v/tech/Verteiler_Mini8_b.jpg.html

(only the motors are missing)