Mini-4

http://mikrokopter.de/images/deu.gif Seite in deutsch http://mikrokopter.de/images/fra.gif Page en français

Mini power distributor

With this small PCB it is very easy to realize the distribution. The Cables don't have to soldered directly to the FlightControl

Shop-Link

http://gallery.mikrokopter.de/main.php/v/tech/MiniVerteiler.jpg.html

http://gallery.mikrokopter.de/main.php/v/tech/MiniVerteiler3.jpg.html

Connections

  • GND - five solder pads
  • Plus - five solder pads
  • D (I2C)
  • C (I2C)
  • 'S' = Buzzer

http://gallery.mikrokopter.de/main.php/v/tech/MiniVerteiler2.jpg.html

Wiring


http://mikrocontroller.cco-ev.de/images/kopter/verdrahtung1.gif
See also: Connections

http://gallery.mikrokopter.de/main.php/v/tech/MiniVerteiler_connect3.jpg.html

http://gallery.mikrokopter.de/main.php/v/tech/MiniVerteiler_connect2.jpg.html

Switch

If the FC is connected via the molex-cable, the switch on the FC can't be used. The FC is powered up when the supply is connected to the MiniPowerDistribution



KategorieHardware